A recent study shows that consumers are currently increasing demand for nitrogen machines, stimulating the previous downturn in the market, in response to this phenomenon, experts remind: hope that everyone interest choice and purchase suitable for their own nitrogen machines. Dongguan nitrogen machine manufacturers talk about nitrogen machine emergency response methods, the following points hope to help you solve the problems in daily use.

Nitrogen machine strain solution criteria:

1. After an emergency occurs, you should be calm and calm, and increase the damage to the minimum level under the condition of ensuring personal insurance and facility insurance;

(2) After the emergency occurs, the relevant units should be informed and guided at the first time, and the relevant personnel should take effective measures to reduce the damage;

3. The operator should be familiar with the principle, structure, function, insurance protection and installation of the facility. After the incident occurs, invalid contingency measures should be formulated and implemented in a timely manner according to the practical situation;

4. After the leakage incident, the origin of the leakage should be cut off in time, and the personal insurance should be guaranteed according to the standard. If the danger and personal insurance should be withdrawn in time;

5. After the occurrence of the overpressure incident, it should be immediately confirmed whether the insurance installation of the facility can fail. If it fails, the pressure origin should be cut off or turned down to ensure that the pressure does not exceed the acceptance line of the facility;

6. After the occurrence of the cut-off incident, closely monitor whether the pressure vessel can emerge overpressure scenes, and the pressure of each medium is manually mastered. The standard is one person to operate, one person to monitor, and contact the power supply unit in time to reply to the power supply; When all power outages are occurring, the clue should be calm, manually master each conditioning valve in time, and open the main valve of each medium when unnecessary to prevent the occurrence of overpressure;

7. After the emergency power failure incident, should promptly tell the relevant units, relevant personnel, understand clearly the power failure area, is the whole wind piecemeal power failure, or all power failure, do not take ineffective measures in time to reduce the loss and damage, if the full power failure incident, should open the deaerator inlet valve as soon as possible, and deaerator piecemeal fresh-keeping pressure. Open the inlet valves of each pump, control the steam manually, and wait for the call back. After the call back, contact the vulcanization team in time to restore the fragmentary abnormal operation, is losing the relevant instructions, can eliminate the preservation and pressure, wait for frozen water, hardened water supply after the deformity, the media will be sent to the vulcanization team in succession, the pump shaking in accordance with the operation regulations to stop, send steam to the rapid, to prevent the water loaded;

8. Stop the wind: to check the wind source results in time, and is the longest time to manually master each conditioning valve, gas-closed valve master two station valves, gas-open valve master bypass valve, according to the pressure gauge on the pipeline manual conditioning master, one person to monitor, one person to operate, to ensure insurance;

9. When the measuring tool disk is disconnected, it is necessary to immediately tell the electrician and the measuring tool worker to switch the standby circuit, manually master each valve, adjust the pressure and measure. One person to operate, one person to monitor, to ensure personal insurance;

10. Each emplacement operator and training worker must be familiar with the function and role of the emplacement facility, and can operate strictly in accordance with the operation regulations under urgent circumstances;

11. After the incident, it is necessary to make detailed records, timely report to the lower units for guidance, write clear speeches and resolution processes, and record to note. Request the operator to take the task as the duty, have a high degree of duty and servant weng material single-mindedly look at the task.

Shenzhen Troy Gas Equipment Co., Ltd. is a domestic professional air separation equipment manufacturing enterprises, set R & D, design, manufacturing, sales, service and other diversified integrated services, to provide the industry with more suitable, more economical, more effective gas solutions, the main equipment is nitrogen machine, PSA nitrogen machine, oxygen generator, hydrogen purification device, carbon purification device. Troy adheres to the corporate philosophy of "quality first, integrity service", with the service system of "scientific, rigorous and innovative", pioneering and forging ahead, taking market demand as the guide and customer as the center.