When using a nitrogen generator, it is necessary to pay attention to its changes and some problems, so what is the specific? Nitrogen generator manufacturers, let you parse.

First observe the color change gel from the side, you can replace the silicone according to the need, the replacement should be turned off the power, until the pressure indicator is 0, after drying the tube, unscrew the clockwise direction, remove from the instrument upside down, then unscrew the cover in the counterclockwise direction, replace, and then install in the opposite direction to ensure the seal.

Then note the automated instrumentation control system that turns on nitrogen to purge clean rooms and piping systems, and has an automatic empting-normal height of 10 minutes, so only 10 minutes of high-purity nitrogen output after each turn on.

When the instrument works to consume distilled water, it can usually complement each other between the assembly line according to the situation to ensure the electrolyte level. Manufacturers of nitrogen generators continue to launch.

These are the problems to pay attention to when the nitrogen generator manufacturer introduced the nitrogen generator is used. I hope this will help you.