In the vulcanization process of rubber tires, water vapor has been used in the past to pressurize the capsules, which greatly reduces the service life of the capsules, and 99.99% mixed-read nitrogen is generally used abroad to inject the capsules, effectively improving the use of the capsules. From the comprehensive consideration of gas cost and capsule cost, it is obviously better than the old process. Dongguan City Troy Gas Equipment Co., LTD. - Nitrogen system output 0.5Mpa high purity nitrogen, through the nitrogen booster ginger high purity nitrogen pressure from 0.5Mpa to 3.3Mpa, high pressure nitrogen through the electric regulator pressure reduction to the user's required pressure, and then into the process production line. If the nitrogen production system fails and the goods need to be repaired and maintained, the spare gas storage tank provides nitrogen to the production line to ensure continuous production and gas supply.

Because in the vulcanization process of rubber tires, nitrogen mainly carries some water vapor and dust after use, and the pressure is significantly reduced, and the temperature is significantly increased, such as recycling and reuse, not only can save a lot of costs, but also can solve the problem of emission pollution.

The Trojan nitrogen machine is controlled by PLC program, easy to use, usually in addition to daily check, boot, no manual operation, the system will run perfectly according to the set program, the output of nitrogen flow, dew point, pressure, purity can be displayed online. Troy nitrogen machine - the service life of the equipment is as long as 8-10 years, the daily maintenance is good, the equipment can be used for more than 10 years.