Nitrogen generator maintenance for nitrogen machine maintenance:

Nitrogen generator maintenance work: 1. Under normal circumstances, the electrolyte in the machine is released for new liquid after use every six months. If the operation is normal (no change in gas production), it is maintained once a year.

2. Check whether the pipe joint inside the machine is loose or air leakage on time.

Method: Just close the gas valve of the gas equipment or directly block the air outlet of the back panel after the pressure gauge pointer to the overpressure setting value, usually (0.19Mpa),5 minutes later will not fall. If yes, the machine has air leakage; If not, the use of the machine is normal, there is a leak appearance need to tighten the seal from the head. 

3, often use dry compressed air to clean the power supply and the machine. 

4, check the switching status of the solenoid valve in the machine on time, that is, when the water indicator is lit, the water solenoid valve is not a normal magnetic appearance.