Troy PSA nitrogen machine technology offers the following advantages:

1. Energy saving and low cost: PSA advanced process is a simple method of nitrogen production, nitrogen can be produced in a few minutes after starting, low energy consumption, nitrogen cost is lower than cryogenic air separation nitrogen and bottled nitrogen.

2. Reliable and safe performance: microcomputer control, fully automatic operation, no need for special training operators, just press the start switch, you can automatically run, thus continuous production of nitrogen.

3, nitrogen purity is stable, fully monitored by the instrument to ensure the required nitrogen purity.

4, the selection of high-quality carbon molecular sieve: has the advantages of large adsorption capacity, high compression performance, long service life.

5, high-quality control valve: high-quality special pipe pneumatic valve can ensure the stable and reliable operation of nitrogen production equipment.

6, strong technical force and excellent after-sales service: equipment containerization, on-site installation, only need to connect the air source, power supply; Excellent electrical and mechanical assembly technology, provide continuous technical services, our technicians are responsible for on-site commissioning and training operations.



Maintenance and construction guidance of Troy nitrogen machine: simply clean the site, cut off the gas and power, two people remove the head of the adsorption tower, two people remove all the pipes of the nitrogen machine, remove the waste in the adsorption tower, clean it up, check whether the top and bottom split plate of the adsorption tower of nitrogen equipment is damaged, and repair it in time. All pipelines should be cleaned with compressed air, pneumatic valve to check the sealing ring damage, serious need to replace the pneumatic valve. The air treatment part of the filter is updated, and the activated carbon filter pipeline transformation has a simultaneous construction. After all the work is completed, install all the pipes and valves, ventilate and energize, purge the entire system pipeline once, and start the carbon molecular sieve charging operation with the guidance of the on-site supervisor. After the loading, start the nitrogen maker, check whether each interface is leaky, and test nitrogen purity and productivity.